FORMULATIONS
It is recommended for formulations where high level of non staining - rust protection is desired. Can be used for formulating greases, hydraulic fluids, slushing oils, and other industrial products.
| COMPONENT | |
|---|---|
| NAPTHANIC OIL | 0.5-25% |
| PARAFFINIC OIL | 0.5-25% |
| SOLVENTS - (KEROSENE, TOLUENE, MTO, ETC.) | 0.5-25% |
PACKING UNIT
20 KG CARBOYS, 200 KG DRUMS
APPLICATION
- Corrosion inhibitor in mill oils, rust preventatives, coatings and greases
- Dispersant and corrosion inhibition in engine oil.
- Wetting agent
- Non-staining
SPECIFICATION SHEET
| TEST | METHOD | MIN | MAX | VALUE |
|---|---|---|---|---|
| APPEARANCE | VISUAL | BROWN CLEAR LIQUID | BROWN CLEAR LIQUID | |
| SP. GRAVITY @ 15.6°C | ASTM D 1298 | 1.05 | 1.10 | 1.05 |
| COLOUR, DILUTE | ASTM D 1500 | 3.0 | 5.0 | 4.5 |
| VISCOSITY @ 100°C, CST. | ASTM D 445 | 50 | 100 | 75 |
| FLASH POINT, °C (COC) | ASTM D 92 | 180 | 202 | |
| WATER CONTENT, % WT. | ASTM D 95 | 0.5 | NIL | |
| AVERAGE MOLECULAR WT. | ASTM D 3712 | 1050 | 1150+ | 1100 |
| MINERAL OIL, % WT. | ASTM D 3712 | 45.0 | 50.0 | 47.0 |
| BARIUM SULFONATE, % WT. | ASTM D 3712 | 50.0 | 55.0 | 52.0 |
| BARIUM CONTENT, % WT. | ASTM D 5185 | 6.5 | 6.7 | 6.6 |
| TBN, MG KOH/GM | ASTM D 974 | 2.0 | 5.0 | 3.0 |