Rust & Corrosion Inhibitor Additive is specially formulated non staining, odorless having lubricity and antiwear properties with special additives. It can be used as a rust inhibitor/friction modifier in various applications. It is an oil soluble Rust & corrosion inhibitor additive recommended for turbine oils, circulating oils, hydraulic oils, greases, automotives& various metalworking applications.
FORMULATIONS
Rust & Corrosion Inhibitor Additive is specially formulated non staining, odorless having lubricity and antiwear properties with special additives. It can be used as a rust inhibitor/friction modifier in various applications. It is an oil soluble Rust & corrosion inhibitor additive recommended for turbine oils, circulating oils, hydraulic oils, greases, automotives& various metalworking applications.
| APPLICATION | TREAT LEVEL |
|---|---|
| INDUSTRIAL LUBRICANTS | 0.1 - 0.8 % |
| GREASE | 0.5 - 1.0 % |
| METAL WORKING FLUIDS | 0.3 - 5.0 % |
| ENGINE OILS & POWER TRANSMISSION FLUIDS | 0.2 - 0.8 % |
| OILS & SOLVENTS | 0.5 - 5.0 % |
| SYNTHETIC LUBRICANTS | 0.4 - 1.2 % |
PACKING UNIT
20 KG CARBOYS, 200 KG DRUMS
FEATURES
- It is non-staining having detergent, dispersant properties.
- It gives better performance at lower concentrations and also cost effective.
- It is non acidic in nature hence there are no chances of reverse effect on degradation and formations of acids at higher temperatures.
- Higher maximum protection due to high thermal stability.
- Effective on ferrous and non-ferrous metals.
- It has excellent reserved alkalinity, which protects oil degradation.
- Excellent inherent dispersancy, which helps in preventing deposit formation.
- It prevents catalytic effect of the metal at higher temperatures.
- Compatible with all conventional automotive and industrial additives.
SPECIFICATION SHEET
| TEST | METHOD | MIN | MAX | VALUE |
|---|---|---|---|---|
| APPEARANCE | VISUAL | BROWN VISCOUS LIQUID | BROWN VISCOUS LIQUID | |
| SPECIFIC GRAVITY @ 15.6°C | ASTM D 1298 | 0.90 | 0.990 | 0.964 |
| COLOUR, DILUTE | ASTM D 1500 | 2.0 | 5.0 | 4.0 |
| VISCOSITY @ 1000C, CST. | ASTM D 445 | 50.0 | 90.0 | 55 |
| FLASH POINT, 0C (PMCC) | ASTM D 93 | 175 | 200 | |
| WATER CONTENT, % WT | ASTM D 95 | 0.5 | 0.1 | |
| COPPER STRIP CORROSION TEST @ 100°C FOR 3 HOURS | ASTM D 130 | 1 | 1.0 | |
| TBN, MG KOH/G | ASTM D 2896 | 10.0 | 31.0 |